The TD MakerSpace

Prepare your print in Creality Print. 

You can download your 3D model in the MakerSpace and insert it to Creality Print to prepare your print on site.

Or, you can prepare it in Creality Print ahead of time from your own device and export the G-code with all your print settings configured.

PLA Filament is available in a variety of colours on a cost recovery basis. Visit the TD MakerSpace to see what options are currently available.

For material prices, visit the MakerSpaces page. 

Patrons can book time on the 3D printer computer to prepare and queue their prints.

Reserve the 3D Printer computer here.

3D prints can take many hours. Reserving the 3D printer computer does not guarantee that the 3D printer will also be available at that time.

If the printer is available, you can start printing it right away.

If it is not, you can send your prepared print to the printer and then queue it with staff. To queue your print, tell staff the name of the print job you sent to the printer and which filament you would like to print it with.

Either way, leave your contact details with staff at the circulation desk so we can contact you when your print is complete. 

For a 58mm button:

• The piece of paper should be 70mm in diameter.
• Your design should be 53mm in diameter at the centre, with no important elements such as text outside that area.

The Delhi Branch has a 9" by 9" Cricut EasyPress and pressing mat available to use to apply heat-transfer vinyl to flat surfaces. 

The EasyPress may be used with NCPL's heat-transfer vinyl, or patrons may bring their own heat-transfer materials.

Be sure to use the appropriate temperature and timing settings for the material you are using. 

The following machine tools are available to use with the Cricut:

• Premium Standard Blade
• Engraving Tip
• Fine Debossing Tip
• Foil Transfer Tips
• Knife Blade
• Rotary Blade

We make every effort to replace worn out or damaged machine tools without any disruptions to service.

If you believe a machine tool needs to be replaced while you are using the Cricut, please inform one of our helpful staff right away. 

Many Cricut materials must be loaded on to the machine on an adhesive mat. 

The following mat types and sizes are available to use with the Cricut Maker 3 in Delhi at no cost:

• StandardGrip (12" and 24")
• LightGrip (12")
• StrongGrip (12")
• FabricGrip (12" and 24")

Patrons may also bring their own Cricut Smart materials which can be loaded into the machine without a mat.

You may also bring your own Cricut mats, including specialty mats, as long as they are compatible with the Maker 3.