Port Rowan Maker Bar

Button Maker

The Port Rowan Branch has a 58mm button maker.

For a 58mm button:

The piece of paper should be 70mm in diameter.
Your design should be 53mm in diameter at the centre, with no important elements such as text outside that area.

For materials and prices, see the MakerSpaces page.

Cricut

Each NCPL Branch has a Cricut Maker 3 available for patron use.

When preparing your project in Cricut Design Space, be sure your machine is set to Cricut Maker 3.

The Port Rowan Branch has a 9" by 9" Cricut EasyPress and pressing mat available to use to apply heat-transfer vinyl to flat surfaces.

The EasyPress may be used with NCPL's heat-transfer vinyl, or patrons may bring their own heat-transfer materials.

Be sure to use the appropriate temperature and timing settings for the material you are using.

The following machine tools are available to use with the Cricut:

We make every effort to replace worn out or damaged machine tools without any disruptions to service.

If you believe a machine tool needs to be replaced while you are using the Cricut, please inform one of our helpful staff right away.

Many Cricut materials must be loaded on to the machine on an adhesive mat.

The following mat types and sizes are available to use with the Cricut Maker 3 in Delhi at no cost:

Patrons may also bring their own Cricut Smart materials which can be loaded into the machine without a mat.

You may also bring your own Cricut mats, including specialty mats, as long as they are compatible with the Maker 3.

For materials and prices, see the MakerSpaces page.

Norfolk County Public Library
46 Colborne St. S.
Simcoe, Ontario N3Y 4H3
Phone: 519-426-3506
Fax: 519-426-0657
Locations and Hours